Apple explains how to clean your Vision Pro

CheckCitation/SourcePlease click:macrumors

(XR Navigation Network February 03, 2024)apple警告称，不应使用Windex和高乐氏等消毒剂清洁VisionPro. Instead, users should simply use a dry or slightly damp cloth.

为了清洁Vision Pro的盖板玻璃，苹果鼓励你使用干净、干燥的超细纤维布，类似于附带的抛光布一样。如有必要，用户可以在擦拭Vision Pro之前为超细纤维布喷洒蔡司清洗液。

Apple warns that if the Vision Pro is stored loosely in a backpack, tote, or pocket, the polishing cloth may attract particles and may scratch the Vision Pro.The company recommends storing it in a clean bag. The polishing cloth can be machine or hand washed as needed to ensure it is clean enough.

To clean the display, Apple says users should first cover the Vision Pro's protective cover and place the headset on a level surface. Then, wipe the optical display with a microfiber cloth. If needed, use Zeiss cleaning spray.

Zeiss Optical Inserts should be removed from the Vision Pro prior to cleaning. They can be cleaned with Zeiss Lens Wipes, Zeiss Cleaning Spray, or warm water and should be completely dry before reattaching to the head unit.

Users should use a lint-free cloth, soft-bristled brush, or non-stick tape to remove dust debris stuck around the display. Stains in this area can be wiped with a damp cloth, but care should be taken to avoid getting wet.

To clean Light Seal, face pads, headbands and lids, the user can use unscented dishwashing liquid but should avoid cleaning wipes, disinfectant wipes and laundry detergents.5 teaspoons (25 ml) of unscented dishwashing liquid should be mixed in two cups (500 ml) of lukewarm water in a clean container and then immerse Light Seal, face pads, headbands or lids in the liquid and gently rub the the surface for about two minutes. Then remove it, rinse it with tap water while to remove excess soap, and let it dry at room temperature. It should not be used until completely dry.

The audio headband should be cleaned with a lint-free cloth. To avoid microphones, speakers, power connectors, headband connectors, and aluminum covers, gently moisten with water and hypoallergenic soap. It should be dried with a cloth before connecting to the main system. The speaker grille can be cleaned with a dry cotton swab.

Once the battery is disconnected, you can clean the battery with a damp, lint-free cloth to avoid moisture near the power cord connector. To clean the cable itself, you can use a cloth moistened with soapy water. It should be allowed to dry overnight before being used again with the Vision Pro.